You are here: Home » Products » Glove Machine » Customized Chain Transmission Latex Glove Machine

Customized Chain Transmission Latex Glove Machine

The latex glove production line uses natural latex or synthetic rubber as the main raw material and other chemicals as auxiliary materials. The hand mold is cleaned with acid and alkali, and then cleaned with water again. Then the cleaned hand mold is first immersed in hot water and heated then immersed into coagulant and dried for dipping. After dipping, go into an oven for preliminary drying, flushed with hot water and then sent to another oven for curing and drying to form. After the gloves are demolded, they are inflated or filled with water for inspection, washed.centrifuged. and dried before packaging and sending them to the finished product warehouse.

Model:
HG-GM
Brand:
HG

Quantity:
Availability:





Inquire Add to Basket 天猫购买

Product Description

1,Adopt the most advanced gloves production technology and production process layout, product qualification rate is more than 97%, protein content is lower than 120 micrograms per gram;
2,TPU Coating technology
3,Imported surfactant solidifier, finished membrane is uniform, no powder mold release
4,The introduction of foreign advanced transmission main chain structure, chain little resistance during operation, Production of high speed, stable operation
5,A main motor drag, solve the drag, difficult to synchronize, fault point, difficult maintenance, and other issues
6,Adopt vertical hot air circulation drying oven, compared with other forms of hot air circulation, save energy consumption by almost 20%
7,Used for cleaning mold splitter six roller long hair scrub mould technology;
8,Mold directional, machine printing technology;

9,A variety of specifications of production, on the same edge automatic adjustment, the PU edge roller, long service life;
10,Can design according to the needs of customers of different length, height, cost models;

Product Specification

Model	Length（M）	Width(M)	Height(M)	Capacity（pcs/hr）	Mould（pcs）
HG-MG-50	50	2	6	5000	3500
HG-MG-70	70	2	6	7000	4900
HG-MG-90	90	2	6	9000	6300
HG-MG-100	100	2	6	10000	7000
HG-MG-120	120	2	6	12000	8400
HG-MGD-90	90	5.5	6	18000	12600
HG-MGD-100	100	5.5	6.5	20000	14000
HG-MGD-120	120	5.5	6.5	24000	16800
HG-MGD-130	130	5.5	6.5	25000	18200
HG-MGF-130	130	6	10	25000	18500
Heating energy	Natural gas、Coal、Steam、Diesel

Procurement process

ORDER

To make contact

→Engineer confirms the size of customer's workshop→Desing plant layout plan
→Design product line drawings and confirm by both parties
→Buy steel, manufacture tank, tank and other parts for production line
→Shipment to customer plant
→The engineer came to the factory to guide the installation

→Commissioned finished product

微信图片_20221125104748

What are the Features of a Customized Chain Transmission Latex Glove Machine?

A Customized Chain Transmission Latex Glove Machine can help you increase your productivity and efficiency when mass producing latex gloves. These machines are designed to be easily customized to your specific needs and requirements. Some of the features that you may find on a Customized Chain Transmission Latex Glove Machine include:

-An adjustable conveyor belt speed that can be set according to your production needs
-A built-in glove flipper that helps improve the quality of your gloves
-An automatic glove counter that keeps track of your production progress
-A safety switch that prevents accidental activation of the machine
-A durable construction that is built to last

How to Use a Customized Chain Transmission Latex Glove Machine

If you have a latex glove machine that has been customized with a chain transmission, you will need to follow a few simple steps in order to get the most out of it. First, make sure that the power is turned off and the safety switch is in the "off" position. Next, remove the drive belt from the motor pulley and disconnect the motor lead wires. Once these steps have been completed, you can now slide the transmission case off of the motor.

With the transmission case removed, you will have access to the sprockets and chains. Inspect both of these components for any wear or damage. If everything looks good, you can now reassemble the transmission case and reinstall it on the motor. Be sure to reconnect all lead wires and replaced the drive belt before powering on your machine.

Now it's time to test out your newly customized latex glove machine! Install a new latex glove on one of your hands and press down on the start button. The gloves should inflate quickly and evenly. If they do not, check all connections and make sure that everything is properly installed before trying again. With a little practice, you'll be able to produce perfect latex gloves every time!

Maintenance and Repair of a Customized Chain Transmission Latex Glove Machine

The maintenance and repair of a customized chain transmission latex glove machine is a very important part of keeping your machine in good working condition. There are a few things that you should keep in mind when performing these tasks, and we will go over them in this article.

First of all, it is important to make sure that the area around the machine is clean and free of any debris or other objects that could potentially get caught in the moving parts. This includes making sure that there is nothing blocking the path of the glove fingers as they move through the machine.

Once you have ensured that the area is clear, you can begin inspecting the different parts of the machine. First, take a look at the drive chain to make sure that it is not damaged or excessively worn. If you notice any damage, it is best to replace the entire chain rather than just individual links.

Next, check all of the bearings for wear and tear. If any of them are starting to show signs of wear, it is best to replace them before they fail completely. Additionally, check the sprockets for any damage or excessive wear. These should be replaced as well if necessary.

Finally, inspect the gloves themselves for any holes or tears. If you find any, it is best to patch them up or replace them entirely so that they do not cause further damage to the machine.

By following these simple tips, you can ensure that your customized chain transmission latex glove machine will continue

Customized Glove Machine Chain transmission Customized Glove Machine Chain transmission Glove Machine Jiangsu Huigang Technology glove making machine glove production line

Related Products

Semi-Automatic Dotting PVC Plastic Glove Machine

Dispenser Dipping Multi-Function Glove Machine

Stainless steel customised glove production line for glove maker

Automatic PVC Glove Production Line for Industrial